- Overview
- Company Profile
- Product Description
- Product Parameters
- Detailed Photos
Basic Info.
Product Description
Our is specialized in the manufacture of dredging hose.oil hose.rubber fender and other rubber products.our main products are as follows:
1.Large bore discharge/suction hose;
2.Floating discharge hose.plastic float.pipe float;
3.Submarine oil hose and floating oil hose;
4.Rubber plate for pump of Dredger.rubber frame for Dredger and sealing strip;
5.Rubber fender for Quay and Tuy Boat;
6.Floating discharge hose is our high-tech product which is firstly developed by CDSR nationwide;
7.Floating oil hose is the patented product which is firstly developed by CDSR nationwide.
short description:
A Floating Steel Pipe is composed of steel pipe, flotation jacket, outer cover and flanges at both ends. The main materials of the steel pipe are Q235, Q345, Q355 or more wear-resistant alloy steel.
Structure and Materials
A Floating Steel Pipe is composed of steel pipe, flotation jacket, outer cover and flanges at both ends. The main materials of the steel pipe are Q235, Q345, Q355 or more wear-resistant alloy steel.
Features
(1) With good rigidity, straight pipe ensures good smoothness.
(2) With good wear resistance.
(3) Lining with low friction coefficient, low conveying resistance.
(4) Relatively wide range of working pressure rating.
(5) With high tensile strength and stiffness.
(6) With good floating performance, can float on the water under working conditions.
(7) With good working stability and good resistane to winds and waves.
Technical Parameters
| (1)Nominal Bore Size | 500mm,600mm,700mm,750mm,800mm,850mm,900mm,1000mm,1100mm,1200mm |
| (2)Hose Length | 6m ~ 11.8 m (tolerance:±50 mm) |
| (3)Working Pressure | 2.5 MPa~3.0 MPa |
| (4)Buoyancy Level | SG 1.8~SG 2.3 |
| *Customized specifications are also available | |
Application
The Floating Steel Pipe is mainly used in floating pipelines. Due to the characteristics of steel pipe, it cannot be bent, Floating Steel Pipes need to be connected alternately with rubber hoses in a pipeline to enable the pipeline to be bent during use. The Floating Steel Pipe has good resistance to wind and waves, but meanwhile, as the soft connections in a pipeline composed of Floating Steel Pipes and rubber hoses, the rubber hoses usually are not bent to a big angle, and the bending angle of each rubber hose has to be within a reasonable range, so as to ensure that the whole pipeline is smooth and unobstructed. Therefore, the pipeline layout is very important, and it would be better if the pipeline is used in a relatively gentle environment, so as to prevent rubber hoses from excessive bending which is caused by strong winds and big waves, and will lead to the failure of normal operating.
If the operating has to be carried out in the environment of strong winds and big waves, which floating hose can withstand, a pipeline composed of Floating Steel Pipes spaced connected with Floating Hoses can also be considered as a solution in this case. Its cost is higher compared with the Floating Steel Pipes and Rubber Hoses combination, so it is generally not recommended as the first option.
The Floating Steel Pipe has high conveying capacity and can transport all kinds of meterials in dredging projects. It can not only convey mixtures of water(or seawater), silt, clay and sand, ranging in specific gravity from 1.0 g/cm³ to 2.0 g/cm³, but also convey mixtures of water(or seawater), gravel, flaky weathered rock and coral reef, ranging in specific gravity from 1.0 g/cm³ to 2.3 g/cm³.
--------------------------------------------------------------------------
ARISONS is a professional Rubber&Construction manufacturer in China. The factory is located in Jiangsu, closed to Shanghai. After 15 years of development, it has a mature production system, a professional engineering team, a quality inspection department and a strong production line, providing a one-stop design scheme and product design for customers in many countries.
Our main products are rubber series products, bubble diffuser, water treatment equipment, aeration pipe, aeration disk, large pipe machine, driving, etc., we pay attention to quality, and will make different solutions according to different customers, provide the cheapest price, achieve the most perfect effect, has reached more partners for customers, look forward to cooperation with you!
Q1. What is your terms of packing?
A: Generally, we pack our goods in Blank Cartons. We privode carton LOGO print service after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before after receive the copy of B/L. We'll show you the photos of the products and packages before you pay the balance.
Q3. What is your terms of delivery?
A: We accept FOB,CIF,CNF,DDP,DDU,LC.etc
Q4. How about your delivery time?
A: Generally, it will take 7 to 10 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.
